Home » VERTICAL CNC MACHINING CENTRES » Vcenter-A Advanced Series » Vcenter-A72

Vcenter-A72

Click the large picture to Zoom

Construction Upgrade
Y-axis travel 600 mm, Victor’s new Vcenter-A85 and A110 have been launched to set up a new standard for C-frame type VMC. Supreme rigid and tough column enables the Z-axis acceleration 0.75G, the Vcenter-A85 and A110 presents rapid federate 42/42/42 m/min in all axes to minimize  spindle noncutting time and to maximize spindle utilization.

With 10.4” color display included as standard on Victor’s package, Fanuc 21i-MB control has included AI contouring control which is capable of addressing look-ahead up to 80 blocks to offer optimal reliability with the highest level of machine integration. A strong machine with PLC  developed in-house by highly experienced engineers, Vcenter-A85/A110 offer numerous safety features and maximizes the machine efficiency to meet the demands for most productions. For higher speed and precision, the control option Fanuc data server board can be installed to extend the memory length (Victor’s offer 320MB ATA card) to upgrade the data transfer rate. This controller can be upgraded to 18i-MB control which is  capable of addressing 180 blocks to improve the surface finish. With the assistance of RISC board installed, the AI preview contouring can be upgraded to 600 blocks of HPCC (High Precision Contouring Control) or HP-nano-CC for even higher speed machining and minimal cutting time.The Fanuc conversational function “Manual Guide i” is included as standard in Victor’s NC package 21i/18i-MB to reduce the programming
time.

Item UnitVcenter-A85Vcenter-A110
TravelX axis travelmm8501100
Y axis travelmm600600
Z axis travelmm560560
DistanceSpindle center to columnmm720720
Spindle nose to table surfacemm150 ~ 710150 ~ 710
TableTable work areamm1100 x 6001350 x 600
Dimension of T-slotmm6 x 18 x 1006 x 18 x 100
Max. table loadkg10001200
SpindleSpindle taper BT-40BT-40
Spindle motor - cont / 30 / 10minkW7.5 / 11 / 15
Opt. 15 / 18.5 / -		7.5 / 11 / 15
Opt. 15 / 18.5 / -
Spindle speedrpm12000 (Opt. 15000)12000 (Opt. 15000)
Feed rateRapid feed rate - X / Y / Zm/min42 / 42 / 4242 / 42 / 42
Axis acceleration - X / Y / Zm/sec20.5G / 0.5G / 0.75G0.5G / 0.5G / 0.75G
Axis feed motor - X / Y / ZkW4.5 / 4.5 / 5.54.5 / 4.5 / 5.5
Cutting feedrate by tablem/min10 (Opt. 15)10 (Opt. 15)
X ballscrew (dia. x pitch)mm45 x P16 (Opt. P8)45 x P16 (Opt. P8)
Y ballscrewmm45 x P16 (Opt. P8)45 x P16 (Opt. P8)
Z ballscrewmm45 x P16 (Opt. P8)45 x P16 (Opt. P8)
Linear guide width (X / Y / Z)mm45 / 45 / 4545 / 45 / 45
ToolsMax. tool lengthmm300300
Max. tool weightkg77
Magazine capacity 24 (Opt. 32)24 (Opt. 32)
Max. tool diameter (without adjacent tools)mm80 (125)80 (125)
Tool exchange timesec.2.4 (T-T), 5.4 (C-C)2.4 (T-T), 5.4 (C-C)
Pull stud angledeg.15 (JIS 40P)15 (JIS 40P)
Tool selection method RandomRandom
MachinePower requirementkVA40 (excl. CTS)40 (excl. CTS)
Min/Max. air pressurekg/cm25.5 ~ 6.55.5 ~ 6.5
Coolant tank capacityL510550
Std. NC controller (Fanuc) 0i-MD (10.4")0i-MD (10.4")
Floor space requirement (with conveyor)mm4227 x 35704827 x 3570
Max. machine heightmm27852785
Machine weightkg70707400

Standard accessories:

  • Fully enclosed splash guard
  • Fanuc 0i-MD (10.4") control
  • Spindle oil cooler
  • Air conditioner for electric cabinet
  • Two screw-type chip removers
    (4 off for Vcenter-A130)
  • Rigid tapping
  • Remote MPG
  • Hand tools and toolbox
  • T nuts for table slot
  • 3-step warning light
  • Auto power off system
  • Leveling blocks
  • Oil skimmer
  • Air gun
  • Coolant gun

Optional accessories:

  • Air dryer
  • Chip conveyor with cart
  • High-powered spindle motor
  • 15000 rpm spindle (DCS)
  • Coolant through spindle (CTS)
  • 32 or 40 tool magazine
  • Linear scales
  • Auto tool length measurement
  • Stop block for special tools
  • 4th/5th axis interface
  • Rotary tables
  • Auto part measuring
  • Auto door
  • Fanuc 21i/18i/31i / Heidenhain iTNC-530 control
 

Features