Home » VERTICAL CNC MACHINING CENTRES » Vcenter Essential Series » Vcenter 145

Vcenter 145

Click the large picture to Zoom

In vertical machining center, we have launched six series such as VCENTER-55/70, VCENTER-85/102ABC, VCENTER-110/130, VCENTER-145, VCENTER-205 and VCENTER II-550. The advantages of VCENTER-145 are below.

Machining centers built to withstand the heaviest of today's cutting conditions

Vcenter-145 has been designed with very large heavy-duty, hardened and ground boxways on all 3 axes which allows the Vcenter-145 to absorb most any cutting forces. The Meehanite cast columns, saddles, headstocks and beds have all been reinforced with computer analyzed ribs to guarantee better damping and rigidity properties. These rugged machining centers have been tested and proved to make light work out of some of the toughest machining materials, so let the Vcenter-145 tackle your roughest jobs.

ITEM   Unit Vcenter-145
Travel X axis travel mm 1450
Y axis travel mm 700
Z axis travel mm 700
Distance Spindle center to column mm 725
Spindle nose to table surface mm 200 ~ 900
Table Table work area mm 1650 x 650
Dimension of T-slot mm 6 x 18 x 100
Max. table load kg 2200
Spindle Spindle taper   BT-50
Spindle motor-cont / 30 min kW(AC) 11 / 15
Spindle speed rpm 6000
Feed rate Rapid feed rate-X/Y/Z m/min 18 / 18 / 15
Axis feed motor-X/Y/Z kW 4.0/4.0/4.0
Cutting feedrate by table m/min 10
X/Y ballscrew (dia. x pitch) mm 50 x P10
Z ballscrew mm 50 x P10
Tools Max. tool length mm 400
Max. tool weight kg 15
Magazine capacity   24 (disk)
Max. tool diameter
(without adjacent tools)		 mm 110 (200)
Tool exchanging time sec. 4.9(T-T), 11(C-C)
Pull stud angle deg. 45
Tool selection method   Random
Machine Power requirement kVA 30
Min./Max. air pressure kg/cm2 5.5 / 6.5
Coolant tank capacity L 600 (2 x 300)
Std. NC controller   FANUC 0i-M
Floor space requirement mm 3800 x 3765
Max. Machine height mm 3029
Net weight kg 13200

Standard accessories:

  • Fully enclosed splash guarding
    (except Vcenter-145)
  • Hand tools and tool box
  • T nuts for table slot
  • Coolant flush on bottom guarding
    (except Vcenter-145)
  • Built-in work light
  • Spindle oil cooler
    (only for Vcenter-110/130/145)
  • Auto power off system
  • Leveling blocks
  • Program end light
  • Rigid tapping
  • Alarm lamp
  • Remote MPG
  • Air conditioner for electrical cabinet

Optional accessories:

  • Chip conveyor with cart
    (2 chip conveyors for Vcenter-145)
    (Please specify when machining Aluminum or Cast Iron)
  • Spindle oil cooler
    (for Vcenter-55/70/85/102)
  • 2-step gearbox
    (max. spindle speed 6000 rpm)
  • High speed spindle
    (10000,12000,14000,15000, 20000 rpm)
  • High powered spindle motor
  • Oil hole coolant
  • Coolant through spindle
  • Air blow system
  • Linear scale feedback
  • Auto tool length measurement
  • Electrical counterbalance
  • Workpiece measurement
  • 4th axis rotary table
  • Higher column with spacer
  • Table shower system
  • Fully enclosed splash guarding for Vcenter-145
  • BT-50 tooling with gearbox
    (for Vcenter-85/102/110/130)